DN80 (3") AIRVAC Vacuum Interface Valve - AV3
DN80 Vacuum Interface Valve. The valve complies fully with AS4310:2004 and the WSAA code.
The valve is supplied complete with controller.
>>DN80 Valve Parts List and Drawings
WaterCon Products
AIRVAC Vacuum Sewerage Systems
WaterCon are the Australian Representatives for AIRVAC Vacuum Sewerage Systems.
We carry stock in WA of most of the AIRVAC vacuum sewerage system product range used in Australia. We manufacture many of the components at our Welshpool workshop.
Contact WaterCon for pricing and for information on any items and equipment not shown.
DN50 (2") AIRVAC Vacuum Interface Valve - AV2
DN50 Vacuum Interface Valve. Intended uses for this product include the collection and transport of fluids such as urinal
discharges, gray water, condensate, cleaning water and similar waste sources with minimal solids content.
>>DN50 Valve Parts List and Drawings
DN32 (11/4") AIRVAC Vacuum Interface Vacuum Valve
DN32 Sump Assembly. 0.5 Gallon Sump W/ 1-1/4 Inch [32mm] Valve. Discharge Through Floor or Deck. Fridge and freezer condensation removal etc
>>DN32 Valve Parts List and Drawings
AIRVAC Vacuum Valve Controller - AC
Vacuum valve controller to suit the DN80 Vacuum Interface Valve
>>Controller Parts List and Drawings
AIRVAC Vacuum Valve Controller Rebuild Kit - ACRBK
Spare parts and rebuild kits for the AIRVAC vacuum interface valves and controllers.
>>Valve Rebuild Kit Parts List
Vacuum Collection Pit Suction Kits
The Vacuum Collection Suction Kit contains the flex coupling, and other the components to fit out a standard concrete collection chamber ready.
Electric Air Admission Control (EAAC)
The EAAC admits air into the vacuum main independently of the controller. The EAAC acts on a preset time interval and vacuum levels in the main. It is used to improve performance of the system
grundfos industrial pumping and dosing products
WaterCon can supply the full range of Grundfos industrial pumping and dosing product range. We can also design, manufacture, install and commission complete pumping and chemical dosing systems.
Contact WaterCon to find out how we can provide you with a complete pumping solution
Other Products
Sewerage Pump Station mechanical components
WaterCon stocks most components and sub-assemblies to allow prompt manufacture and delivery of standard items used for Water Corporation pump stations, access chambers and other sewerage infrastructure.
WaterCon can supply and install the complete mechanical packages including pumps and valves for Water Corporation pump stations.
- Stainless Steel Alarm and Control Hole Covers
- Stainless Steel and Galvanised Ladders - Standard and with Sliding Extension Stiles
- MSCL Pipework and Specials
- Stainless Steel Inlet Specials, Knife Gate Valves and Valve Extension Spindles
- Stainless Steel Baffle Plates
- Site Installation Commissioning